PSCM

Rotary Multiturn Hall-Effect Position Sensor

El PSCM es un sensor de posición rotativa multiturno sin contacto basado en la tecnología de efecto Hall y un reemplazo rentable para los codificadores absolutos. También es perfectamente adecuado para sustituir a los codificadores accionados por cable al traducir un movimiento lineal en posición angular. En caso de pérdida de energía, el sensor conservará la última posición medida.

Este sensor compacto y resistente es configurable con rangos angulares entre 720 y 11,520 grados (hasta 32 revoluciones) y soporta alimentación de baja y alta tensión. Los conjuntos de conectores están disponibles bajo pedido.

El alto nivel de protección contra la entrada, resistencia a la vibración y temperatura lo hace ideal para entornos extremos de aplicaciones industriales, fuera de carretera y de transporte.





KEY FEATURES



Without any gears or mechanical interfaces the sensor is easily assembled and calibrated and subject to limited wear and tear over lifetime.
Keeps the last position on power loss with configurable electrical angles from 720 to 11.520 degrees.
The rugged package protects the sensor from dust, moisture, vibration and extreme temperatures for usage in the most demanding environments.
The non-contacting design allows for an extra-long product lifetime of up to 50 million cycles.
Programmable transfer function and switch outputs as well as different output protocols and redundancy levels available
The magnet is securely fastened to the shaft and acts as only moving component in the sensor.


SPECIFICATIONS



Linearity¹ ±1% absolute (±0.1% on request)
Electrical angular range Configurable from 720° to 11.520° (2 to 32 turns)
Output protocols2 Analog (Ratiometric)
Output curve standard
inverted
redundant3
05% to 95% Vdc (CW)
95% to 05% Vdc (CCW)
05% to 95% (CW and CCW)
Switch output On request
Resolution Up to 12 bit
Supply voltage4 5V ±10%
10V to 30V
Supply current Single output
Redundant output
Typ 32.7 mA
Typ 41.2 mA

1 Ferromagnetic materials close to the sensor (i.e. shaft, mounting surface) may affect the sensor’s linearity.

2 Other output protocols / specifications available on request.

3 Redundant and other output functions available upon request.

4 Please note: Sensor saves last position if power is turned off, but does not count turns if not powered. For application instructions please reach out to Piher.

Rotational life Up to 50.000.000 cycles
Mechanical range 360° (endless rotation)
Shaft diameter 6mm
Operating and storage temperature* -40° to +85°C
Shock 50g
Vibration 10-2000 Hz; 10g; Amax 0,75 mm

* Higher on request



APPLICATION EXAMPLES





DOWNLOADS