3D STEP file Datasheet
 By integrating a mechanical stop at 290 degrees unintentional over travel is mechanically prevented. This makes the PSE-290 especially suitable for human machine input. Custom versions with different shafts, mechanical or electrical rotational angle can be delivered on request.
Piher Sensing Systems’ PSE Series Rotary Position Sensors are based on contactless hall-effect technology and deliver high accuracy and linearity in a compact package. Increased rotational life and robustness against humidity, vibration and shock make them perfectly suited for harsh industrial and transportation environments. These absolute sensors will not lose its values even after a power failure.
KEY FEATURES
 |
True, contactless operation Without any gears or mechanical interfaces the sensor is easily assembled and calibrated and subject to limited wear and tear over lifetime. |
 |
Mechanical stop Reliably stops the rotary movement at a maximum rotational travel of 290 degrees. |
 |
Integrated shaft The magnet is securely fastened to the shaft and acts as only moving component in the sensor. |
 |
Made for harsh environments The rugged package protects the sensor from dust, moisture, vibration and extreme temperatures for usage in the most demanding environments. |
 |
Adaptable to your requirements Custom mechanical design, programmable transfer function as well as different output protocols and redundancy levels available. |
MECHANICAL SPECIFICATIONS
Mechanical Angular Range
|
290° ±5°
|
Connection
|
Fly leads, connector assembly on request
|
Shaft diameter
|
6,25mm
|
Mounting Method
|
Panel mount
|
Other specifications on request
ELECTRICAL SPECIFICATIONS
Linearity
|
±1% absolute (±0.5% upon request)
|
Electrical Angular Range
|
270°
|
Output Protocol
|
Analog (Ratiometric), PWM
|
Resolution
|
12 bit
|
Output Range
|
10% to 90% Vdc (standard)
90% to 10% Vdc (inverted)
|
Supply Voltage
|
5V ±10%
|
Supply Current
|
Typ 8.5 mA
|
Voltage Protection
|
±18V
|
Self-diagnostic features
|
Yes
|
Other specifications on request
DIMENSIONS

TYPICAL OUTPUT CURVE

APPLICATIONS
|
|
|
Industrial
▶ Paint spray systems ▶ Test and measurement equipment ▶ Machine tool control
Medical
▶ Equipment control
Off-Highway
▶ Cab controls
|
Download 3D STEP file
Download datasheet
|