Piher sensing systems - custom potentiometers and position sensors

Datasheets

DocumentsDate added

Order by : Name | Date | Hits [ Descendent ]

The PS2P-LIN linear sensors create immunity to magnet´s misalignment that negatively impacts operational performance and results in labour intensive maintenance programmes. It complements our  PS2P-CON and PS2P-ARC series of air-gap non-contact angular rotary position sensors.

• Specifically designed for leadfree reflow soldering processes (excellent performance).
• Cermet resistive element.
• IP54 protection according to IEC 60529.
• Plastic material according to UL94V-0.
• Alumina substrate.
• Full traceability.
• Also upon request:
-  Long life model for low cost control potentiometer applications.
-  Mechanical detents.
-  Low torque version.
-  Centering pins.
-  Wiper positioned at initial, 50% or fully clockwise.

• Specifically designed for leadfree reflow soldering processes (excellent performance).
• Up to 10K cycles mechanical life.
• IP54 protection according to IEC 60529.
• Cermet resistive element.
• Plastic material according to UL94V-0.
• Alumina substrate.
• 10mm version available (PSC-10).
• Full traceability.
• Also upon request:
-  Long life model for low cost control potentiometer applications.
-  Mechanical detents.
-  Low torque version.
-  Centering pins.
-  Wiper positioned at initial, 50% or fully clockwise.

file icon PSC-360 datasheet.Tooltip 10/26/2015 Hits: 2267

The robust PSC-360 is  a low-cost high performance non-contacting rotary position sensor for automotive, off-road, medical and industrial applications whithout the limitations of potentiometric solutions (wear, limited electrical angles...) A configurable switch ouptput is integrated within the sensor too.

Full redundancy can be achieved by employing a dual core version or the simple placement of two sensors within the housing.

Sealed and flange mounted for easy positioning when necessary, it provides high stability  under harsh environment conditions such as vibration, shock, extreme temperatures / humidity, dither, moisture or dirt. Featuring a modular architecture, electrical & mechanical characteristics can be fully customised to customer´s needs as well as connector configurations.

file icon PST-360 datasheet.Tooltip 10/26/2015 Hits: 2683

The PST-360 through / hollow shaft position sensors combines three critical design features; 1) through hole where the shaft passes through the sensor, 2) high accuracy absolute position feedback over up to 360°, and 3) a true non-contacting sensing element. Piher’s design does not rely on gears or other rotating parts.

This innovative and unique patented design, features the following advantages:

- Compliments the attributes of the target application.
- Mechanical integrity that matches customer´s application by design.
- Unique shaft mounted design that mounts at the pivot point of the application.
- No levers, connecting rods or mechanical interfaces needed.
- Adapts to shaft´s eccentricity, mounting tolerances and mechanical wear over the life of the application.

file icon PSX-10 & PS-10 datasheets.Tooltip 10/23/2015 Hits: 2438

10mm SMD potentiometer

  • Self extinguishable plastic UL 94V-0 (PS-10).
  • Carbon resistive element.
  • Specifically designed for leadfree reflow soldering
  • processes (excellent performance).
  • Full traceability.
  • Moisture sensitivity level 1 (PS-10).
  • Embossed tape according to IEC 60286-3:2007.
  • IP54 protection according to IEC 60529.

Also upon request:

  • Wiper positioned at initial, 50% or fully clockwise.
  • Long life model for low cost control potentiometer applications.
  • Low torque versions.
  • Mechanical detents.
  • Locating pins for accurate PCB positioning.
  • Shafts and knobs.
file icon PT-10 datasheetTooltip 01/12/2016 Hits: 4957

• Carbon resistive element
• IP54 protection according to IEC 60529
• Polyester substrate
• Also upon request:
• Wiper positioned at initial, 50% or fully clockwise.
• Supplied in magazines for automatic insertion.
• Long life model for low cost control potentiometer applications
• Self extinguishable plastic UL 94V-0
• Cut track option
• Special tapers
• Mechanical detents
• Low torque version
• Special switch option
• 3% Linearity and 100K cycles mechanical life

file icon PT-15 datasheet. Tooltip 02/25/2016 Hits: 2729

PT-15 datasheet.15mm carbon potentiometer.

- Carbon resistive element.
- IP54 protection according to IEC 60529.
- Polyester substrate.
- Also upon request:
•  Long life model for low cost control pot. applications
•  Low torque option
•  Supplied in magazines for automatic insertion.
•  Wiper positioned at initial, 50% or fully clockwise.
•  Self extinguishable plastic UL 94V-0.
•  Cut track option.
•  Special Tapers.
•  Mechanical detents.

file icon PT-6 datasheet.Tooltip 05/31/2019 Hits: 97

6mm carbon resistive element potentiometer.
IP54 protection according to IEC 60529.
Polyester substrate.

Also upon request:
• Wiper positioned at initial, 50% or fully clockwise.
• Supplied in magazines for automatic insertion.
• Long life model (10K cycles).
• Housing available in self extinguishable plastic (UL94V0).
• SMD version available (see PS-6 datasheet).
• Mechanical detents.

Page 3 of 5