Custom potentiometers and position sensors

Datasheets

DocumentsDate added

Order by : Name | Date | Hits [ Descendent ]

Programmable Hall effect sensor

  • Simple & Robust Magnetic Design.•
  • High resolution (up to 14-bit)•.
  • Absolute position feeback up to 360º (keeps position on powerloss).•
  • Low profile.•
  • Easy integration into existingsystems•.
  • Full true-redundant versions.•
  • Conceived for harsh environments applications.•
  • Protected from magnetic fields, dust, moisture, vibrations and exteme temperatures.•
  • Analog oputput ready for easy potentiometer replacement.• Multiturn.•
  • Programmable Linear TransferCharacteristic:(some positive slopes & one negative slope can be programmed in the same transfer characteristic; up to 4 programmable points)•.
  • Self-Diagnostic features•.
  • Over voltage protection and reverse voltage protection.
file icon PST-360 datasheet 10/26/2015

The PST-360 through / hollow shaft position sensors combines three critical design features; 1) through hole where the shaft passes through the sensor, 2) high accuracy absolute position feedback over up to 360°, and 3) a true non-contacting sensing element. Piher’s design does not rely on gears or other rotating parts.

This innovative and unique patented design, features the following advantages:

- Compliments the attributes of the target application.
- Mechanical integrity that matches customer´s application by design.
- Unique shaft mounted design that mounts at the pivot point of the application.
- No levers, connecting rods or mechanical interfaces needed.
- Adapts to shaft´s eccentricity, mounting tolerances and mechanical wear over the life of the application.

file icon PT-10 datasheet 01/12/2016

• Carbon resistive element
• IP54 protection according to IEC 60529
• Polyester substrate

Also upon request:

• Wiper positioned at initial, 50% or fully clockwise.
• Supplied in magazines for automatic insertion.
• Long life model for low cost control potentiometer applications
• Self extinguishable plastic UL 94V-0
• Cut track option
• Special tapers
• Mechanical detents
• Low torque version
• Special switch option
• 3% Linearity and 100K cycles mechanical life

file icon PT-15 datasheet 02/25/2016

PT-15 datasheet. Through hole 15mm carbon potentiometer.

- Carbon resistive element.
- IP54 protection according to IEC 60529.
- Polyester substrate.
- Also upon request:
•  Long life model for low cost control pot. applications
•  Low torque option
•  Supplied in magazines for automatic insertion.
•  Wiper positioned at initial, 50% or fully clockwise.
•  Self extinguishable plastic UL 94V-0.
•  Cut track option.
•  Special Tapers.
•  Mechanical detents.

file icon PT-6 datasheet 05/31/2019

6mm carbon resistive element potentiometer.
IP54 protection according to IEC 60529.
Polyester substrate.

Also upon request:
• Wiper positioned at initial, 50% or fully clockwise
• Supplied in magazines for automatic insertion
• Long life models (10K cycles)
• Housing available in self extinguishable plastic (UL94V0)
• SMD version available (see PS-6 datasheet)
• Mechanical detents (stop positions)

file icon PTC-10 datasheet 10/11/2018

PTC-10 datasheet.

10mm cermet potentiometer.

• Cermet resistive element.
• IP54 protection according to IEC 60529.
• Plastic material according to UL94V-0.
• Alumina substrate.
• Also upon request:
• Low torque version.
• Available as SPDT switch.
• Laser trimming for tighter tolerances.
• Wiper positioned at initial, 50% or fully clockwise.
• Supplied in magazines for automatic insertion.
• Long life model for low cost control applications.
• Special tapers.
• Mechanical detents.

file icon PTC-15 datasheet 10/19/2018

PTC-15 datasheet.

15mm cermet potentiometer / sensor.

- Cermet resistive element.
- Plastic material according to UL94V-0.
- Alumina substrate.
- IP54 protection according to IEC 60529.
- Also upon request:
  •  Wiper positioned at initial, 50% or fully clockwise.
  •  Long life model for low cost control pot. applications.
  •  Supplied in magazines for automatic insertion.
  •  Low torque option.
  •  Available as SPDT switch.
  •  Laser trimming for tighter tolerances.
  •  Mechanical detents.
  •  Special tapers.

file icon S-15 datasheet. 04/15/2016

360º customiseable rotary switch.

The N-15 potentiometer/sensor series has been expanded to incorporate both encoders and rotary switches in the same package configuration allowing the user to design in any one of the three options whilst keeping the same board layout and user interface.


The S-15 switch series has been specifically designed to offer a flexible and customiseable rotary switch solution for the Automotive industry typically employed as multi-position interior/exterior lighting, Traction or Airbag enable/disable controls. The technology developed for the aforementioned S-15 solutions is also available for all types of custom switches however demanding your application may be.

Page 4 of 5