PSCM
Rotary Multiturn Hall-Effect Position Sensor
The PSCM is a non-contacting multiturn rotary position sensor based on Hall-effect technology and a cost-effective replacement for absolute encoders. It is also perfectly suited to substitute wire actuated encoders by translating a linear movement into angular position.In the event of a power loss, the sensor will preserve the last measured position.
This compact and rugged sensor is configurable with angular ranges between 720 and 11.520 degrees (up to 32 revolutions) and support for low and high-voltage power supply. Connector assemblies are available on request.
The high level of ingress protection, vibration and temperature resistance makes it well suited for extreme environments of industrial, off-highway and transportation applications.
KEY FEATURES
SPECIFICATIONS
Linearity¹ | ±1% absolute (±0.1% on request) | |
Electrical angular range | Configurable from 720° to 11.520° (2 to 32 turns) | |
Output protocols2 | Analog (Ratiometric) | |
Output curve |
standard inverted redundant3 |
05% to 95% Vdc (CW) 95% to 05% Vdc (CCW) 05% to 95% (CW and CCW) |
Switch output | On request | |
Resolution | Up to 12 bit | |
Supply voltage4 |
5V ±10% 10V to 30V | |
Supply current |
Single output Redundant output |
Typ 32.7 mA Typ 41.2 mA |
1 Ferromagnetic materials close to the sensor (i.e. shaft, mounting surface) may affect the sensor’s linearity.
2 Other output protocols / specifications available on request.
3 Redundant and other output functions available upon request.
4 Please note: Sensor saves last position if power is turned off, but does not count turns if not powered. For application instructions please reach out to Piher.
Rotational life | Up to 50.000.000 cycles |
Mechanical range | 360° (endless rotation) |
Shaft diameter | 6mm |
Operating and storage temperature* | -40° to +85°C |
Shock | 50g |
Vibration | 10-2000 Hz; 10g; Amax 0,75 mm |
* Higher on request