Manufacturer of Angle, Position, Speed, Tilt and Current Sensors
The PS-10 is a 10 mm surface-mount control potentiometer developed for applications that require reliable, repeated adjustment of electrical parameters. Its carbon resistive element provides an effective balance between performance and cost, making it suitable for high-volume products where durability, design flexibility, and user interaction are key requirements.
The shaftless architecture allows designers to implement custom actuation concepts ranging from direct manual adjustment to geared or motor-driven control systems. Available with multiple rotor styles, optional tactile detents, and IP54 protection, the PS-10 can be adapted to a wide variety of control interfaces. Typical applications include appliance controls, timers, thermostats, power tools, consumer electronics, and industrial equipment. With operating life of up to 10,000 cycles, it is designed to deliver consistent performance throughout the service life of the end product. Potential uses include appliance program selection, thermostat and temperature control, timer and relay adjustment, power tool speed regulation, audio volume control, fan speed control, garden and outdoor equipment, and cooking appliance controls.
■ Up to 10.000 life cycles
■ IP54 protection
■ Embossed tape packaging according to IEC 60286-3:2007
■ Wiper positioned at initial, 50% or fully clockwise
■ Self extinguishable plastic (UL 94V-0) available
■ Up to 16 mechanical detents for tactile feedback
■ Locating pins for accurate PCB positioning
■ Low torque version available
■ Shafts and knobs
| Taper¹ | Linear |
| Range of values¹ | 1KΩ ≤ Rn ≤ 1MΩ |
| Max. Voltage | 200 VDC |
| Nominal power | 0.15 W @ 50°C (122°F) |
| Residual resistance¹ | ≤ 0.5% Rn (5Ω min.) |
| Equivalent noise resistance | ≤ 3% Rn (3Ω min.) |
| Operating temperature¹ |
-40°C to +85°C (-13°F to + 158°F) |
1 Others available on request
| Mechanical rotation angle | 235° ± 5° |
| Electrical rotation angle | 220° ± 20° |
| Torque |
Rotational: 0.4 to 2 Ncm (0.6 to 2.7 in-oz) Stop: > 5 Ncm (>7 in-oz) |
| Life1 | Up to 10k cycles |
1 Others check availability
| Test method (CEI 393-1) | ΔR(%)- typical test results | |
|---|---|---|
| Electrical life | 1.000h at 50°C; 0.15W | ±10% |
| Mechanical life | 1000 cycles at 10 to 15 cpm | ±10% |
| Temperature coefficient |
-40°C; +85°C -25°C; +70°C |
±1.500 ppm/°C ±1.000 ppm/°C |
| Thermal cycling | 16h at 90°C and 2h at -40°C | ±5% |
| Damp heat | 500h at 40°C and 95% relative humidity (RH) | ±15% |
| Vibration | 2h each plane at 10Hz - 55Hz | ±3% |
| Storage | 6 months at 23°C ±2°C and 50% RH | ±5% |
Out of range values may not comply with these results. Standard test conditions: temperature:23°C ±2°C and 45% to 70% RH
