The HRPM Series of Hall-effect Rotary Position Sensors is a cost-effective, non-contacting position sensing solution for applications in harsh environments such as heavy-duty transportation and industrial.
This compact sensor with integrated AMP superseal connector is based on a touchless concept with separate housings for electronics and magnet. The magnet is mounted on the actuated axis and without wear and tear due to radial forces, the reliability and lifetime are increased significantly.
Fully sealed and flanged mounted for easy positioning, this 2-piece sensor is versatile with configurable angular ranges from 50 to 360 degrees, option for a bare or housed magnet, different pin-outs and support for low and high-voltage power supply.
| Linearity* | ±1% absolute (±0.5% upon request) |
| Angular range** | Programmable from 50 to 360 degrees |
| Output protocol** | Analog (Ratiometric) |
| Resolution | Up to 12 bit |
| Supply voltage | 5V ±10% / 7V-32V |
| Supply current | 12 mA / 14 mA |
| Voltage protection |
Overvoltage: +10V / +36V Reverse voltage: -10V / -30V |
| Self-diagnostic features | Yes |
* Ferromagnetic materials close to the sensor (i.e. shaft, mounting surface) may affect the sensor’s linearity ** Others available upon request
| Life | Virtually unlimited |
| Air gap | 3mm ±1mm |
| Mechanical range | 360° (endless rotation) |
| Mating connector | AMP Superseal 282087-1 |
| Operating temperature | -40° to +125°C |
| Shock | 50g |
| Vibration | 5Hz to 2000 Hz; 20g; Amax 0,75 mm |
| Sealing | IP67, IP69K |
