Play Resistant Arc Position Sensor
Piher Sensing Systems’ PS2P-ARC position sensor creates immunity to radial and axial play on pivot joints where misalignment result in poor operational performance and labor intensive maintenance programs.
The magnet is attached to the rotating parts of a pivot joint and the electronics module to the chassis (or vice versa). Without the need for any gears or linkages the sensor is easy to mount thereby delivering additional cost reduction on the production line and improving product reliability and durability during its lifetime.
The PS2P-ARC measures changes in position relative to the sensor by detecting the movement of a sinusoidal magnetized arc magnet that is located in a separate housing and is only sensitive to the flux density co-planar with the IC surface.
The PS2P series is complemented by touchless linear (PS2P-LIN) and angular (PS2P-CON) position sensors. All sensors of the series will deliver the same level of precision and stability throughout their lifetime as on the first day they are installed – despite extremes of vibration, shock, temperature and contamination. As absolute sensors they will not loose the values even after a power failure.
|Linearity*||±1% absolute (±0.5% upon request)|
|Angular range **||
CAN SAE J1939
10% to 90% Vdc (CW)|
90% to 10% Vdc (CCW)
10% to 90% Vdc (CW and CCW)
|Switch||Programmable on request|
|Resolution||Up to 12 bit|
Analog and PWM
7V to 15V***
7V to 32V
Single version |
Typ 8.5 mA|
Typ 17 mA
* Ferromagnetic materials close to the sensor (i.e. shaft, mounting surface) may affect the sensor’s linearity.
** Other electrical angular ranges on request.
*** Voltages up to 25V on request.
|Air gap||2mm ±1mm|
23mm (Model M009)|
31mm (Model M008)
|Operating and storage temperature||-40° to +125°C|
|Vibration||10-2000 Hz; 10g; Amax 0,75 mm|
* Other specifications available