Hall-Effect Through-Shaft Rotary Position Sensor
The PST-360 position sensor combines a through-shaft design with accurate absolute position feedback and a true non-contacting sensing element that does not rely on gears or other rotating parts.
This innovative and unique patented design complements the attributes of the target application and maintains the mechanical integrity of the application by design. As the sensor is mounted directly at the pivot point no levers, connecting rods or other mechanical interfaces are needed.
Furthermore it adapts to shaft’s eccentricity, mounting tolerances and mechanical wear over the life of the application.
The endless rotation sensor is highly configurable with a programmable angular range between 15 and 360 degrees, different signal output options and support for low and high-voltage power supply.
Multi-turn configurations are available on request.
Analog, PWM, SPI
±1% absolute (±0.5% upon request)|
|Electrical angular range**||Programmable from 15° to 360°|
CAN SAE J1939
|Switch output||Programmable upon request|
Analog, PWM, CAN
Up to 12 bit |
Up to 14 bit
|Supply voltage ***||
5V ±10% |
7V to 15V
Typ 8.5 mA |
Typ 17 mA
Typ 47 mA
|Voltage protection||±10 V|
*Ferromagnetic materials close to the sensor (i.e. shaft, mounting surface) may affect the sensor’s linearity.
**For information on multi-turn sensors please contact Piher
***Voltages up to 25 V possible on request.
|Rotational life||Up to 50.000.000 cycles|
|Mechanical angular range||360° (endless rotation)|
|Rotor diameter *||
*Other rotors on request
|Operating and storage temperature*||-40°C to +125°C|
|Vibration||5-2000 Hz; 20g; Amax 0,75 mm|
|Sealing **||IP67, IP69K|
*Other specifications available
**IP rating on electronics
***EMC-testing according to standards EN 61000-6-2 and EN 6100-6-3. CE-approval applies to analogic-simple and analogic-redundant models.